Bathmate Hydromax Valve Repair Kit

Included: Hydromax valve – 2 pcs; Hydromax valve cap – 1 pc; special key fob for unscrewing the valve – 1 pc.

To disassemble the valve, use the special key fob for unscrewing the valve. Disassembly: - Find the special slots on the valve cap. - Insert the flat part of the key into one of the slots and carefully lift the valve cap approximately 1 mm. Use moderate pressure to avoid damaging the plastic. - Similarly lift the valve cap from the other side by 1 mm. Try to remove the cap by pulling it upward. If you cannot remove the valve cap, repeat the process. - Once the cap is removed, take out the valve to replace it with a new one.

Assembly: - Place the new valve in position with the soft seal facing down. - Put the valve cap back onto the body and check that the valve moves freely in the cap slot. - Then press the cap to secure it in place. Use steady but moderate pressure to avoid damaging the valve or cap. – Done!